505 |
0 |
0 |
|t Mechanisms of Toughening Thermoset Resins /
|r Huang, Y., Imperial College of Science, Technology, and Medicine, University of London, Department of Mechanical Engineering, Exhibition Road, London, SW7 2BX, United Kingdom; Hunston, D. L., National Institute of Standards and Technology, Polymers Division, Gaithersburg, MD 20899; Kinloch, Anthony J., Imperial College of Science, Technology, and Medicine, University of London, Department of Mechanical Engineering, Exhibition Road, London, SW7 2BX, United Kingdom; Riew, C. Keith /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch001 --
|t Fracture-Toughness Testing of Toughened Polymers /
|r Huang, Donald D. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch002 --
|t Multiple-Phase Toughening-Particle Morphology: Effects on the Properties of Rubber-Toughened Poly(methyl methacrylate) /
|r Lovell, P. A.; McDonald, J.; Saunders, D. E. J.; Sherratt, M. N.; Young, R. J. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch003 --
|t Toughened Semicrystalline Engineering Polymers: Morphology, Impact Resistance, and Fracture Mechanisms /
|r Flexman, E. A. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch004 --
|t Deformation and Fracture Toughness in High-Performance Polymers: Comparative Study of Crystallinity and Cross-Linking Effects /
|r Pater, Ruth H., NASA Langley Research Center, Mail Stop 226, Hampton, VA 23665-5225; Soucek, Mark D., NASA Langley Research Center, Mail Stop 226, Hampton, VA 23665-5225; Jang, Bor Z., Materials Science and Engineering, 201 Ross Hall, Auburn University, Auburn, AL 36849 /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch005 --
|t The Damage Zone in Some Ductile Polymers under a Triaxial Tensile Stress State /
|r Tse, A.; Shin, E.; Hiltner, A.; Baer, E. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch006 --
|t Additive Effects on the Toughening of Unsaturated Polyester Resins /
|r Suspene, Laurent, Cray Valley-Groupe TOTAL, Centre de Recherches et de Technologies de Verneuil, Ponc Alata, 60550Verneuil-en-Halatte, France, Current address: Cook Composites and Polymer, 217 Freeman Drive, P.O. Box 996, Post Washington, WI 53074.; Yang, Yeong Show; Pascault, Jean-Pierre, Laboratoire des Matériaux Macromoléculaires, URA-Centre National de la Recherche Scientifique 507, Bât. 403, Institut National des Science Appliqúees de Lyon, 69621 Villeurbanne Cédex, France /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch007 --
|t Particle-Matrix Interfacial Bonding: Effect on the Fracture Properties of Rubber-Modified Epoxy Polymers /
|r Huang, Y., Department of Mechanical Engineering, Imperial College of Science, Technology and Medicine, Exhibition Road, London SW7 2BX, United Kingdom; Kinloch, Anthony J., Department of Mechanical Engineering, Imperial College of Science, Technology and Medicine, Exhibition Road, London SW7 2BX, United Kingdom; Bertsch, R. J., BFGoodrich Company, R and D Center, Brecksville, OH 44141; Siebert, A. R., BFGoodrich Company, R and D Center, Brecksville, OH 44141 /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch008 --
|t Macroscopic Fracture Behavior: Correlation with Microscopic Aspects of Deformation in Toughened Epoxies /
|r Bandyopadhyay, S., Current address: School of Materials Science and Engineering, University of New South Wales, P.O. Box 1, Kensington, New South Wales 2033, Australia /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch009 --
|t Optimization of Mode-I Fracture Toughness of High-Performance Epoxies by Using Designed Core-Shell Rubber Particles /
|r Sue, H.-J., Analytical and Engineering Sciences Department, Texas Polymer Center, Dow Chemical U.S.A., Freeport, TX 77541; Garcia-Meitin, E. I., Analytical and Engineering Sciences Department, Texas Polymer Center, Dow Chemical U.S.A., Freeport, TX 77541; Pickelman, D. M., Advanced Polymeric Systems and Advanced Composites Laboratories, Central Research, The Dow Chemical Company, Midland, MI 48674; Yang, P. C., Advanced Polymeric Systems and Advanced Composites Laboratories, Central Research, The Dow Chemical Company, Midland, MI 48674 /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch010 --
|t Toughening of Epoxy Resin Networks with Functionalized Engineering Thermoplastics /
|r Hedrick, Jeffrey C., Current address: IBM Research Division, Thomas J. Watson Research Center, Yorktown Heights, NY 10598.; Patel, Niranjan M., Current address: IBM Research Division, Thomas J. Watson Research Center, Yorktown Heights, NY 10598.; McGrath, James E. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch011 --
|t Epoxy-Rubber Interactions /
|r McGarry, F. J.; Rosner, R. B. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch012 --
|t The Synergistic Effect of Cross-Link Density and Rubber Additions on the Fracture Toughness of Polymers /
|r Bradley, Walter L., Polymer Science and Engineering Program, Texas A & M University, College Station, TX 77843-3123; Schultz, W., 3M Corporation, 3M Center Building, 201-W-28, Saint Paul, MN 55144-1000; Corleto, Carlos, Polymer Science and Engineering Program, Texas A & M University, College Station, TX 77843-3123; Komatsu, S., Faculty of Engineering, Kinki University, Kure, 72917 Japan /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch013 --
|t Rubber-Modified Epoxies: Analysis of the Phase-Separation Process /
|r Verchère, Didier, Laboratoire des Matériaux Macromoléculaires, Unité Recherche Associée-Centre National de la Recherche Scientifique no. 507, Institut National des Sciences Appliquées de Lyon, Bât. 403, 20 Avenue Albert Einstein, 69621 Villeurbanne Cédex, France; Sautereau, Henry, Laboratoire des Matériaux Macromoléculaires, Unité Recherche Associée-Centre National de la Recherche Scientifique no. 507, Institut National des Sciences Appliquées de Lyon, Bât. 403, 20 Avenue Albert Einstein, 69621 Villeurbanne Cédex, France; Pascault, Jean-Pierre, Laboratoire des Matériaux Macromoléculaires, Unité Recherche Associée-Centre National de la Recherche Scientifique no. 507, Institut National des Sciences Appliquées de Lyon, Bât. 403, 20 Avenue Albert Einstein, 69621 Villeurbanne Cédex, France; Moschiar, S. M., Institute of Materials Science and Technology (INTEMA), University of Mar del Plata and National Research Council (CONICET), J. B. Justo 4302, 7600 Mar del Plata, Argentina; Riccardi, C. C., Institute of Materials Science and Technology (INTEMA), University of Mar del Plata and National Research Council (CONICET), J. B. Justo 4302, 7600 Mar del Plata, Argentina; Williams, R. J. J., Institute of Materials Science and Technology (INTEMA), University of Mar del Plata and National Research Council (CONICET), J. B. Justo 4302, 7600 Mar del Plata, Argentina /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch014 --
|t Thermal Shock Resistance of Toughened Epoxy Resins /
|r Kubouchi, Masatoshi, Department of Chemical Engineering, Tokyo Institute of Technology, O-okayama, Meguro-ku, Tokyo 152, Japan; Hojo, Hidemitsu, Department of Industrial Engineering and Management, Nihon University, College of Industrial Technology, 1-2-1 Izumi-cho, Narashino-shi, Chiba-ken 275, Japan /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch015 --
|t Toughening Epoxy Resin with Poly(methyl methacrylate)-Grafted Natural Rubber /
|r Rezaifard, Amir H., Department of Materials Technology, Brunel University, Uxbridge UB8 3PH, England; Hodd, Kenn A., Department of Materials Technology, Brunel University, Uxbridge UB8 3PH, England; Barton, John M., Materials and Structures Department, Defence Research Agency (Aerospace Division), Farnborough GU14 6TD, England /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch016 --
|t Toughening Epoxies Using Rigid Thermoplastic Particles: A Review /
|r Pearson, Raymond A. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch017
|
505 |
0 |
0 |
|t Preparation of Poly(butylene terephthalate)-Toughened Epoxies /
|r Kim, Junkyung; Robertson, Richard E. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch018 --
|t Toughening of Epoxy Resins by Epoxidized Soybean Oil /
|r Frischinger, Isabelle, Current Address: Polymer Division, Ciba-Geigy A.G., CH-4002 Basel, Switzerland; Dirlikov, Stoil /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch019 --
|t Structure-Property Relations of High-Temperature Composite Polymer Matrices /
|r Morgan, R. J., Michigan Molecular Institute, Midland, MI 48640; Jurek, R. J., Michigan Molecular Institute, Midland, MI 48640; Larive, D. E., Michigan Molecular Institute, Midland, MI 48640; Tung, C. M., Northrop Corporation, Hawthorne, CA 90250-3277; Donnellan, T., Naval Air Development Center, Warminster, PA 18974, Current address: Grumman Corporation, Department 584, M.S. 802-26, Beth Page, Long Island, NY 11714-3580. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch020 --
|t Model Multilayer Toughened Thermosetting Advanced Composites /
|r Hoisington, Mark A.; Seferis, James C. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch021 --
|t Multiphase Matrix Polymers for Carbon-Fiber Composites /
|r Bascom, Willard D., Materials Science and Engineering Department, University of Utah, Salt Lake City, UT 84112, Deceased.; Gweon, S-Y., Materials Science and Engineering Department, University of Utah, Salt Lake City, UT 84112; Grande, D., Boeing Materials Technology, Boeing Commercial Airplanes, Seattle, WA 98124 /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch022 --
|t Thermal Characterization of the Cure Kinetics of Advanced Matrices for High-Performance Composites /
|r Kenny, J. M.; Trivisano, A.; Nicolais, L. /
|u http://dx.doi.org/10.1021/ba-1993-0233.ch023
|